This backpack sprayer is acid-resistant. Handy for cleaning tasks. With a maximum capacity of 16 liters, this backpack sprayer is ideal for large areas. The backpack sprayer comes with four different nozzles. The sprayer can be comfortably carried on the back and is equipped with adjustable shoulder straps. After use, rinse the sprayer thoroughly with water.
Backpack Sprayer Manual Refer to the fourth image in the instructions. 1.Pump cap 2.Pump plunger 3.Pump lever 4.Pump rod 5.Handle 6.Lance 7.Nozzle
Assembling the pump lever and rod: 1.Remove the bag of parts from the backpack sprayer. 2.Slide the pump lever into the opening at the bottom, on the same side as the pump. Turn the lever until the hole is visible. Secure the lever with the large black plastic clip (round ring with an opening and a small pin on the inside). Snap the pin into the hole in the lever (turn the lever if the hole is not visible). 3.Place the black plastic L-piece around the pump rod. Attach the pump rod to the top of the pump plunger. Secure the plastic L-piece with a split pin.
Assembling the lance 1.Attach one end of the hose to the pump plunger. Tighten the connector securely. 2.Attach the other end of the hose to the handle. 3.Attach the lance to the handle. 4.Attach one of the four nozzles to the lance.
There are now some parts left over; these are spare parts. You can see where the parts are located in the third image.
Usage 1.Check that the backpack sprayer is assembled correctly. Fill the tank with a suitable liquid and tighten the filler cap. 2.Use the pump handle to build up pressure in the tank. 3.To spray:
Intermittent use: Press the trigger on the handle to spray and release it to stop.
Continuous use: Press the trigger and lock the handle by pressing the red button below the trigger. Releasing the red button below the trigger unlocks the trigger and stops the sprayer from spraying.
