Pressure sprayer 3 litres

This 3-litre pressure sprayer is suitable for use in and around the garden. The adjustable nozzle allows you to choose between a fine jet or a mist. The handle is equipped with a practical on/off switch. The handy D-handle makes it easy to pump pressure into the sprayer. The base ensures that the pressure sprayer does not tip over easily. The pressure sprayer is rated for a maximum of 3 bar and is equipped with a pressure relief valve that quickly releases the pressure if necessary for safety reasons.

Instructions:
• Unscrew the D-handle including the ring and remove the pump section from the tank, fill the tank
• Replace the pump section and tighten the ring securely.
• Pump air into the tank by moving the handle up and down
• Use the lever to adjust the amount of water you want to spray.
• Pump air into the tank from time to time.
• Clean the tank after use.

Tips for filling the Talen Tools pressure sprayer: Press the D-handle down (into the notches) and then turn it. Then unscrew the handle, including the tube, so that you can fill the bottle directly. 

Tips for using the Talen Tools pressure sprayer (item nos. DS6, DS2, DS12, DS3, DS8): The pressure sprayer is not resistant to strong cleaning agents such as vinegar. Vinegar dissolves the rubber parts, causing the pressure sprayer to malfunction. 

DO NOT FILL WITH VINEGAR OR BOILING WATER!

Always rinse and flush the pressure sprayer with water after use!