Sector Sprinkler - Elbow Model - Brass - Adjustable - For 1/2-inch - With Stake

This water sprinkler from Talen Tools helps you water specific areas in the field or garden. This model features a 1/2-inch connection. The sector sprinkler is made of sturdy brass and is equipped with metal limiters. These sector limiters above the thread largely determine the width of the water spray. Turn them apart for a narrower spray. When you turn them toward each other, the jet becomes wider. Flip the stop spring upward if you want the sector sprinkler to spray 360 degrees .

Knee-style sector sprinkler
This pulse sprinkler features a so-called knee design. In this design, the sprinkler is shaped so that it can be mounted at an angle to a hose. As a result, the garden hose runs slightly more to the side and is better cleared away from the ground or the plants. This means the garden hose causes less damage than it would if it were left lying in the same spot for a long time. You connect the hose using a GK coupling. These couplings are made of strong and wear-resistant brass. Make sure to also equip the garden hose with a GK coupling. The inner diameter may vary for this coupling, since the lug spacing is the same.

Sector Sprinkler on Stake
Secure this sector sprinkler firmly in the ground using the included stake. This stand also allows you to position the sector sprinkler slightly higher in the ground . This ensures optimal water distribution. The water range depends on the water pressure used for sprinkling. At a working pressure of 4 bar, the radius is nearly 13 meters. At a pressure of 1.5 bar, the water reaches just over 10 meters. Don’t be afraid to use higher water pressure, as the brass parts are well-suited to withstand it.

Key advantages of the Talen Tools sector sprinkler
• Sector sprinkler with elbow design
• Pulse sprinkler equipped with a stake and GK coupling
• Garden sprinkler made of wear-resistant and sturdy materials