Sector Sprinkler - T-Model - Brass - Adjustable - For 1/2-inch - With Stake

Want to get started right away with evenly watering your field or garden? This sector sprinkler from Talen Tools comes mounted on a sturdy stake and is equipped with GK couplings on both sides. This flail sprinkler is therefore classified as a T-model sprinkler. This allows you to connect this sector sprinkler to a continuous pipe. The sprinkler features a 1/2-inch connection. The sturdy mount raises the sector sprinkler slightly off the ground. This makes it easier to connect hoses and pipes without them pressing against the ground for extended periods.

Adjusting the Sector Sprinkler
A pulse sprinkler is used to evenly water a specific sector. To do this, it’s important to set the correct spray pattern, along with the correct water pressure. To adjust the width of the spray pattern , use the sector limiters. You’ll find these just above the threads of the sector sprinkler. Turn them apart to narrow the water spray. Do you want a wider water spray? Then turn them further apart. If you want the sprinkler to spray 360 degrees, flip the stop spring upward. The water radius depends on the water pressure. At a pressure of 4 bar, the range is nearly 13 meters. At a pressure of 1.5 bar, the range is about 10.5 meters.

Sector Sprinkler with GK Couplings
On the sides of this sprinkler, you’ll find sturdy GK couplings made of brass. These couplings are universally compatible with other GK couplings. The inner diameter is not a limiting factor. Because the couplings have the same lug spacing, you can always achieve a leak-free connection. Since these specific couplings are also always made of brass, the risk of wear is very low.

Key advantages of the Talen Tools sector sprinkler
• The T-model sector sprinkler makes this model suitable for continuous pipes
• Pulse sprinkler equipped with GK couplings
• Garden sprinkler on a sturdy stake