For a firm and leak-free coupling of spiral hoses or wire hoses, an accessory is often needed. Clamp the hoses securely using these hose clamps from Talen Tools. They consist of galvanized steel. A galvanized clamp is often more resistant to weathering. Rust occurs less quickly, which makes this variant last longer. A hose clamp is used when you want to connect hoses to each other or when a connection does not have a thread or a snap coupling. Hose clamps always give you more options, also with an irrigation system or pond installation. Thread clamp for narrow hoses Hose clamps work optimally if they are properly matched in advance to the width of the hoses to be connected. These clamps from Talen Tools are suitable for narrower hoses. Hoses with a diameter between 10 and 12 millimeters are suitable for this. For wider hoses, there are still plenty options to be found in the assortment. Optionally, you can also choose a clamp with a wing nut. Is the coupling in place? Then it is often convenient to leave it as is. Do not change the clamping force too often, as this will cause metal fatigue.
Set of hose clamps To connect hoses, you often need several couplings. Handy so with this set you can immediately get started with 2 clamps. When clamping the hoses, it is advisable not to tighten them too much. The result? There will be more pressure on the hose. Water may not flow properly when the hose clamps create a kink. When you tighten the screw you can check step by step whether the connection is already leak-free. If so, do not tighten the screw even more. Thus, you also ensure a longer life of the clamp itself.
Main advantages of the hose clamps from Talen Tools - Clamps for connecting or extending hoses - Suitable for narrow garden hoses and wire hoses - Set of 2 for easy coupling
