Wire hose clamp - With screw - Galvanized - 35-40 mm - 2 pieces

A wide spiral hose often needs an additional clamp for a leak-proof connection. This model from Talen Tools is suitable for hoses with a door diameter of 35 to 40 millimeters. Do you have narrower hoses? Then you can also find smaller wire hose clamps in the range of Talen Tools. The clamps consist of sturdy galvanized metal. This makes the clamps more resistant to moisture and weathering. The basic rust protection delays the formation of rust. This keeps the metal strong also in the future.

Adjustable wire hose clamp
The clamps from Talen Tools are very easy to apply. Clamp the hose around a pipe or hose grommet and make sure to tighten the clamps. When you feel that they are tight, you can check the hose for a humidity or air leak. Don't see or feel a leak? Then the clamp is already tight enough. Are you not using the clamps? Then loosen them again and clean and dry them. Thus extend the life considerably.

Wire hose clamps in a set of 2
The wire hose clamp from Talen Tools comes standard per 2 pieces. This also gives yourself some more coupling options. Possibly you can so the air hose or pond hose on both sides firmly connect. Because they consist of galvanized steel and are equipped with a screw clamp, they are also easy to disconnect again. Use a screwdriver that fits well and you easily tighten and loosen them again. Do not turn them too tight. This can both for the clamp and for the hose disadvantageous work.

Main advantages of the wire hose clamps from Talen Tools
- Wire hose clamps for wide spiral hoses
- Adjustable clamping by tightening the screw
- Hose clamps consisting of a set of 2