Often with garden hoses and irrigation systems, you connect your sprinkler accessories with help of a thread or click system. However, do you need to slide the hose over a hose grommet to make a secure connection? Then use these handy hose clamps from Talen Tools. The clamps are slightly flexible and thus adjustable in diameter. The clamps are suitable for hoses with a diameter of 12 to 22 millimeters. Common garden hoses and spiral hoses with a 1/2 inch size are thus suitable for these metal clamps. These clamps are supplied per set of 2. Adjustable hose clamps The clamps can thus be used at different cross-sections. Take advantage of the adjustability of the hoses by loosening or tightening them. You do this with the screw mounted in the clamp. The screw is easily tightened with a screwdriver. A tip? Be careful not to tighten the clamps too much. This may seem smart at first glance to make the connection leak-free. Yet a clamp that is too tight can actually cause problems. The hose being connected can start to kink, which can prevent optimal water flow. This can also increase the pressure in the hose, which makes it too high.
Clamp rings made of galvanized steel To ensure that the clamp rings continue to function after frequent contact with moisture, the metal is galvanized. This galvanized version is more resistant to weather influences. Also, this treated metal is less likely to show metal fatigue. Yourself, you can keep the hose functioning longer by not disconnecting and connecting it too often. Is the connection good? Then it is smart to leave it firmly in place. This model also allows you to extend hoses in length. Use therefore a hose connector that you secure with these clamps.
Main advantages of the hose clamps from Talen Tools - Adjustable hose clamps with screw connection - Wire hose clamps made of galvanized steel - For connecting or extending your garden hose or spiral hose
