Mounting wide hoses on connections without threads or click systems? These hose clamps from Talen Tools are specifically suitable for wider garden hoses, pond hoses and spiral hoses. The steel clamps are suitable for hoses with a diameter of 1 1/4 inch to 1 3/4 inch. In millimeters, this amounts to a diameter of 32 to 50 millimeters. Due to the use of galvanized steel, this version is somewhat more resistant to weathering. Corrosion is less likely to occur, which means that the strength of the steel is also retained for longer they are less likely to rust. With thicker and wider hoses, a strong hose clamp is a must.
Adjustable hose clamps Because the hose clamps cover a range between 32 and 50 millimeters, you know they are flexible. You control that flexibility by using a screw. This screw is easy to tighten with the help of a screwdriver, of course, you unscrew it just as easily. Try to spare the metal a part and do not tighten the clamps too much. This also sometimes has a negative effect on the flow in the hose. It can cause a kink that disrupts water pressure or water flow.
Set of hose clamps to extend your hose Because wider hoses tend to get heavy quickly, you may not always want to handle a very long garden hose or pond hose. You may occasionally extend the hose anyway, if your job calls for it. Note that you then ensure a straight end, which can be slid well over a hose connector. Because these hose clamps are supplied in set of 2, you can now apply a clamp to both sides of the hose extender. Especially with heavy long hoses it is advisable to ensure that fixing certainly with a sturdy clamp.
Main advantages of the hose clamps from Talen Tools - Hose clamps for hoses from 1 1/4 inch to 1 3/4 inch - Adjustable clamping by means of a screw - Also to apply when extending your garden hose or pond hose
